SERVICE PORTFOLIO
:: SERVICES
1- Substations:
MEECO provide Design & Engineering services for Civil, Electrical, Mechanical and protection Design for Utility, Industrial and other consumer substations of Medium & Extra High Voltages up to 380kV. Our engineering covers GIS, AIS indoor and Outdoor Substations.
Our design services are tuned to the divergent requirements of clients – be it a strict adherence to client’s specifications and standards or a comprehensive concept to construction design conforming to International standards and Engineering practices.
Our design services are comprehensive covering Civil, Structural, Architectural, HVAC, Plumbing, Electrical Protection, Indoor and outdoor lighting, AC /DC auxiliary systems, Cable raceway systems, Fire protection apart from the basic Electrical substation layout and equipment sizing design.
We review vendor proposals & technical documents based on client requirement to facilitate equipment selection….more
Our design services are tuned to the divergent requirements of clients – be it a strict adherence to client’s specifications and standards or a comprehensive concept to construction design conforming to International standards and Engineering practices.
Our design services are comprehensive covering Civil, Structural, Architectural, HVAC, Plumbing, Electrical Protection, Indoor and outdoor lighting, AC /DC auxiliary systems, Cable raceway systems, Fire protection apart from the basic Electrical substation layout and equipment sizing design.
We review vendor proposals & technical documents based on client requirement to facilitate equipment selection….more
2- Transmission Lines:
MEECO’s expertise in the area of Overhead transmission line design covers Steel monopole structures as well as latticed structures. Our designs conform to stringent requirements of IEC, ASC, IEEE and other local and client standards as specified by the clients.Using the latest analysis and simulation software like PLSCAD, SAGTEN, Staadpro and PLS-Tower, we provide comprehensive design, engineering and management services for transmission line projects, including feasibility studies and site supervision.
3- Building:
Our comprehensive building design services include Architectural, Structural and Electro- Mechanical design and other associated services for all building types.
We respond to the divergent requirements of clients – be it a strict adherence to client’s specifications and standards or a comprehensive concept to construction design service conforming to the best international standards and practices. We offer our expertise in:
We respond to the divergent requirements of clients – be it a strict adherence to client’s specifications and standards or a comprehensive concept to construction design service conforming to the best international standards and practices. We offer our expertise in:
- Healthcare Architecture
- Office & Retail Projects
- Residential Development Design
- Hotel & Leisure Projects
4- Healthcare.
Innovative, functional, flexible and sustainable master plans!
Innovative, functional, flexible and sustainable master plans!
Being one of the new markets that MEECO has forayed, today, MEECO can boast a wide range of hospital projects that it has undertaken. From refurbishment and new build design consultancy services, feasibility studies to master planning; MEECO is fastly securing crucial projects in the healthcare sector.
Working with the clients from the early stages of a project helps us to examine the whole life performance as well as costs and impacts, enabling a long-term view of sustainability to be taken and highlighting potential cost, environmental or social benefits.
Our approach to innovation also enables us to improve performance, from initial concepts right through to development of technical solutions, management systems and procurement to project completion, operation and maintenance.
Working with the clients from the early stages of a project helps us to examine the whole life performance as well as costs and impacts, enabling a long-term view of sustainability to be taken and highlighting potential cost, environmental or social benefits.
Our approach to innovation also enables us to improve performance, from initial concepts right through to development of technical solutions, management systems and procurement to project completion, operation and maintenance.
5- District cooling.
District cooling means the centralized production and distribution of cooling energy. Chilled water is delivered via an underground insulated pipeline to office, industrial and residential buildings to cool the indoor air of the buildings within a district. Specially designed units in each building then use this water to lower the temperature of air passing through the building’s air conditioning system.
The output of one cooling plant is enough to meet the cooling-energy demand of dozens of buildings. District cooling can be run on electricity or natural gas, and can use either regular water or seawater. Along with electricity and water, district cooling constitute a new form of energy service.
District cooling is measured in refrigeration ton which is equivalent to 12000 BTU’s per hour. Refrigeration Ton is the unit measure for the amount of heat removed. Refrigeration Ton is defined as the heat absorbed by one ton of ice (2000 pounds) causing it to melt completely by the end of one day (24 hours).
District cooling systems can replace any type of air conditioning system, but primarily compete with air-cooled reciprocating chiller systems serving large buildings which consume large amounts of electricity. This air-conditioning system is subject to a difficult operating environment, including extreme heat, saline humidity and windborne sand. Over time, performance, efficiency and reliability suffer, leading to significant maintenance costs and ultimately to equipment replacement.
Empower’s District Cooling system is underpinned by a skilled around-the-clock service team and a comprehensive set of emergency back-up systems that ensure complete reliability and ease of use.
The output of one cooling plant is enough to meet the cooling-energy demand of dozens of buildings. District cooling can be run on electricity or natural gas, and can use either regular water or seawater. Along with electricity and water, district cooling constitute a new form of energy service.
District cooling is measured in refrigeration ton which is equivalent to 12000 BTU’s per hour. Refrigeration Ton is the unit measure for the amount of heat removed. Refrigeration Ton is defined as the heat absorbed by one ton of ice (2000 pounds) causing it to melt completely by the end of one day (24 hours).
District cooling systems can replace any type of air conditioning system, but primarily compete with air-cooled reciprocating chiller systems serving large buildings which consume large amounts of electricity. This air-conditioning system is subject to a difficult operating environment, including extreme heat, saline humidity and windborne sand. Over time, performance, efficiency and reliability suffer, leading to significant maintenance costs and ultimately to equipment replacement.
Empower’s District Cooling system is underpinned by a skilled around-the-clock service team and a comprehensive set of emergency back-up systems that ensure complete reliability and ease of use.
6- System studies.
To meet the stringent industrial Design and Engineering requirement for any kind of projects, be it, new projects, expansion projects or retrofit projects, the expertise of specialists is necessary. MEECO provides this kind of expertise and has capability to provide Design, Engineering and Site support for all activities for Manufacturing Industries projects. We also conduct complete Case Studies to analyze system abnormality and provide solution to overcome the problem.
Our success is based on our well proficient and dedicated design team, high-tech design software tools (Training imparted directly from the original software company) and close interaction with site team during execution.
We are experts in both steady state and transient system studies.
Our success is based on our well proficient and dedicated design team, high-tech design software tools (Training imparted directly from the original software company) and close interaction with site team during execution.
We are experts in both steady state and transient system studies.
7- Testing & Commissioning.
The testing and commissioning of high voltage electrical equipment is a highly specialised activity with each and every installation being tested by a trained engineer to exacting standards.
MEECO testing capability covers an extensive range of disciplines.
Our services include:· Testing of relays of all types and makes
· Scheme and function testing for protection & control panels
· Testing of primary injection, busbar and transformer stability
· Testing of 33kV and 13.8 kV switchgear
· Panels factory testing
· Testing of ACDB, DCDB, auxiliary transformer, NER and RMU
· Providing testing engineers on temporary hire.
MEECO testing capability covers an extensive range of disciplines.
Our services include:· Testing of relays of all types and makes
· Scheme and function testing for protection & control panels
· Testing of primary injection, busbar and transformer stability
· Testing of 33kV and 13.8 kV switchgear
· Panels factory testing
· Testing of ACDB, DCDB, auxiliary transformer, NER and RMU
· Providing testing engineers on temporary hire.
